Lift pads with low intake height
Quickly adjustable lift pad height through the use of new plug-in screw pads. Low intake height of only 98 mm, ideally suited for sport vehicles.
Door stop protection
Specially attached rubber car door protectiion pads prevent the touching of the door or door edge when entering and exiting the vehicle.
Lifting system
Internal carriage in square welded design, with durable load bearings made from nylon, lifted through hydraulic cylinder and chain-over roller. Lifetime of the load bearings up to 10 years in normal operation.
Electrical unlocking
A mechanical safety latch integrated on both sides ensures safety at the workplace. Automatic release of the safety lock when lowering.
Control
24V control box for simple lift operation. "Raise" and "Lower" control via safety pushbuttons. If required, the lift can be secured against unauthorized use.
Included tool holder
A universal tool holder for use with impact wrenches and accessories is delivered as standard with each lift.
Lift pad height adapters (optional)
Optional height adapters for different vehicles. The adapter is plugged into the peg and then turned into secured position.
Spare parts supply
Large spare parts warehouse with more than 20,000 certified parts in original RP-TOOLS quality.
Hand pump for carriage fine adjustment
The fully integrated hand pump allows for fine adjustment of the lifting height, for engine and gearbox installation, exhaust, etc..
Powder-coated surface
Our machines are powder- coated instead of painted. Thick coatings guarantee a high resistance to mechanical stress and a good insulation value against electrical voltage. Weathering and acid-resistant, environmentally friendly.
Emergency lowering system
Emergency lowering unit for lowering in case of power failure.
Assembly instructions with inspection log book
Easy installation via multilingual assembly instructions, with inspection log book for UVV approval, for commercial use.
Hydraulic system with proven technology
Hydraulic, powerful lifting system with two robust and maintenance-free high-pressure cylinders, fewer moving parts and a significantly lower maintenance than a mechanical spindle lift. We use only high quality seals from renowned manufacturers.
Motor
Use of high quality electric motors with copper windings for an increased service life.
Instant Lowering
Our lift can be instantly lowered from any position without having to push the "Raise" button before.
Flat crossover plate
Due to the very flat crossover plate, our lift has a very low crossing height on the ground. In addition, the transfer plate protects the hydraulic hoses and synchronous ropes.
Lifting height
Maximum standard lifting height of 2050 mm, with height-adjustable lift pads.
Symmetric support arms
For even better comfort, all arms can be moved to both the front and rear. This allows you to lift different types of vehicles without any difficulties.
XXL Drive-Thru width
Our lifts allow for a maximum drive-thru width of 2580 mm, with minimum external dimensions. This advantage makes a wide opening of the vehicle door possible.
Parking feature
Ideal as a work platform or to double your parking space for long term parking or wintering of your vehicle on the raised lift. Your car safely stays in position by mechanic support without weighing on the hydraulic system.
3-stage heavy duty support arms
Maximum flexibility through four 3-stage telescoping support arms in a symmetrical design, developed for cars up to the newest transporter generation.
XXL columns
Our support columns have an external dimension of 310 x 260 mm and are built specifically for heavy duty use. Thanks to the special shaping, the columns remain stable even at high loads.
Strong support arms
The brackets have an external dimension of 120 x 120 mm. These XXL brackets lift your vehicles safely.
High quality materials and workmanship
Tested with 50,000 lifting cycles at full load, conforms to CE EN 1493. components production by Italian manufacturers guarantee high product quality and long service life.
High-quality steel profile posts
Specially designed posts with 6 mm thick quality steel and base plates provide a high level of stability, with five anchoring points per column. Low tolerances ensure a 100% fit accuracy.
