Installation- / Removal- / Extraction Tools
Page 1 of 3
Items 1 - 25 of 71
Item no.: RP-BG-2169
Induction Heater - 1.5 kW
- Principle of operation: There is an alternating magnetic field. The metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up. - allows heating of screws / nuts without severely heating surrounding components or even destroying them, as it is often the case when heated with a torch - within the shortest possible...
-
Shipping weight:
5.160 Kg
-
Product weight:
4.275 Kg
Item no.: RP-DL-0015
Induction heater tool
Induction heater tool
enables heating of screws / nuts without other components to heat up or even to destroy, as is often the case during heating with welding torches
is used for E.g. support joint bolts and other fittings on axle and engine
-
Shipping weight:
4.500 Kg
-
Product weight:
4.275 Kg
Item no.: RP-BG-2169-1
Induction Coil Set for Induction Heater - angled 90° - for BGS 2169 - 8 pcs.
for heating screws, nuts, shafts, etc. suitable for induction heater BGS 2169 angled 90° type wire diameter: 4 mm coil height: approx. 23 mm length approx. 220 mm includes coils with the following internal diameters 15 - 19 - 20 - 23 - 26 - 32 - 38 - 45 mm
-
Shipping weight:
1.100 Kg
-
Product weight:
1.045 Kg
Item no.: RP-BG-2169-2
Induction Coil Set for Induction Heater - straight type - for BGS 2169 - 8 pcs.
for heating screws, nuts, shafts, etc. suitable for induction heater product 2169 straight type wire diameter: 4 mm coil width: approx. 23 mm length approx. 230 mm includes coils with the following internal diameters 15 - 19 - 20 - 23 - 26 - 32 - 38 - 45 mm
-
Shipping weight:
1.100 Kg
-
Product weight:
1.045 Kg
Item no.: RP-BG-60160
Terminal Tool Kit - 23 pcs.
- universal range for virtually all vehicles - for damage-free unlocking of terminals and connectors, e.g. for ABS, climate sensors, radios, PDC, trailer coupling modules, and much more - faults due to corrosion or connection defects can be repaired quickly - suitable for round and tab contacts - indispensable for technicians and vehicle electricians
-
Shipping weight:
1.490 Kg
-
Product weight:
1.416 Kg
Item no.: RP-BG-3546
Emergency Car Opening Set
- sold only to authorised workshops - universally applicable - heavy duty model Packed in a wallet
-
Shipping weight:
2.360 Kg
-
Product weight:
2.242 Kg
Item no.: RP-BG-68344
Seal Ring Double Hook Set
- facilitates the removal of the radial shaft sealing rings - differently bended double hooks for different working angles - also suitable for deep-seated seals - extractor claw can be extended - with slide hammer
-
Shipping weight:
2.400 Kg
-
Product weight:
2.280 Kg
Item no.: RP-BG-60100
Cable Splice Release Tool Set - universal - 12 pcs.
- removes wires from terminal blocks without any damage - for round and flat terminal blocks - fits various brands, for example VW, Opel, Ford, Mercedes, BMW and many more - protectice caps prevent damage of the blades In plastic case with foam.
-
Shipping weight:
0.840 Kg
-
Product weight:
0.798 Kg
Item no.: RP-BG-8013
52-piece Radio Removal Tool Set
- allows damage-free removing of car radios - includes U-hooks, special pentagon and internal hexagon wrenches - suitable for following car models: - VW, Audi, Mercedes-Benz, Porsche, Skoda, BMW, Opel, Ford, Fiat Brava - fits on following radios: - Becker (new and old version)...
-
Shipping weight:
1.380 Kg
-
Product weight:
1.311 Kg
Item no.: RP-BG-60120
Terminal Tool Set - for VAG, Porsche - 11 pcs.
- removes wires from terminal blocks without any damage - for round and flat terminal blocks - special set for VAG - protective caps prevent damage of the blades - also suitable for some connectors in the BMW, Daimler, Chrysler, Fiat, Ford, Honda, Jaguar, Opel, Mazda, Mercedes Benz, Mitsubishi, Porsche PSA, Renault, Saab, Toyota, Volvo, VAG - for round contacts with diameter 1.5, 2.3 and 3.5 mm - for...
-
Shipping weight:
0.870 Kg
-
Product weight:
0.827 Kg
Item no.: RP-BG-4034
Tool Tray 3/3: Release Tools, Assembly Wedge and Hook Set - 17 pcs.
- consisting of: - Trim Strip Set - length 160-200 mm - manufactured from high end special plastic - various shapes for working on trim strips, rubber gaskets, interior, door trims, switches, etc. - Hook Set - is needed for laying of cables, stuffing seats, etc. - piercer (straight), hook 90° angled, hook with round head, double angled hook - 2-component handles - Trim Strip Wedge 100x45 mm -...
-
Shipping weight:
1.380 Kg
-
Product weight:
1.140 Kg
Item no.: RP-BG-2169-3
Induction Wire for Induction Heater - for BGS 2169
- for heating flanges, bearing housing, shafts, gears, exhaust connections, etc. - malleable, therefore universal application - suitable for induction heater BGS 2169 - wire diameter: 4 mm - wire length: 800 mm
-
Shipping weight:
0.100 Kg
-
Product weight:
0.095 Kg
Item no.: RP-BG-8415
Door Hinge Mounting Tool Set
- for disassembly and assembly of door hinges, also suitable for other work in tight spaces - includes the following bits with retaining ball and 8 mm hex drive: for Spline screws M8, M10 and M12, as well as for T-Star screws T30, T40, T45 and T50 - offset bit wrench - reversible ratchet
-
Shipping weight:
0.990 Kg
-
Product weight:
0.922 Kg
Item no.: RP-BG-4033
Tool Tray 3/3: Trim Wedges and Scraper Set - 27 pcs.
- consisting of: - 27-piece Trim Wedges and Scraper Set (BGS 8611) - for removal of trim, paneling, etc. - allows a damage-free disassembly, even on painted surfaces - wide range of application through different scraper and removal tool profiles, such as: - scraper with trim guide - slotted lever, angled and straight - disassembly lever, angled and straight, in different widths
-
Shipping weight:
0.900 Kg
-
Product weight:
0.855 Kg
Item no.: RP-BG-8247
Radio Removal Tool Set - 2 pcs.
- for the most common car stereo brands - folds to a handy size - suitable for the following brands: P01 Mercedes, VW, Audi, Becker, Renault, Alpine P02 Mercedes, Porsche, Becker P03 VW P04 Skoda P05 Becker P07 Clarion (new models) P08 Kenwood 2002 P09 Sony P10 Kenwood 98 - 2001 P11 Fiat Bravo, Brava P14 Panasonic 1 hex wrench for BMW 1 hook for...
-
Shipping weight:
0.400 Kg
-
Product weight:
0.380 Kg
Item no.: RP-BG-3538
Door Adjusting Tool - 660 mm
- for cars and small trucks - 660 mm length
-
Shipping weight:
2.240 Kg
-
Product weight:
2.005 Kg
Item no.: RP-BG-2169-1-45
Induction Coil for Induction Heater - 45 mm - angled 90° - for BGS 2169
- for heating of screws, nuts, shafts, etc. - suitable for induction heater BGS 2169 - straight type - wire diameter: 4 mm - coil hight: approx. 23 mm - overall length: approx. 220 mm - Inner diameter: 45 mm
-
Shipping weight:
0.100 Kg
-
Product weight:
0.095 Kg
Item no.: RP-BG-2169-6
Induction Coil for Induction Heater - 25 mm - angled 90° - for BGS 2169
- for heating of screws, nuts, shafts, etc. - suitable for induction heater BGS 2169 - straigth type - wire diameter: 4 mm - coil hight: approx. 23 mm - overall length: approx. 230 mm - coil internal diameter: approx. 25 mm
-
Shipping weight:
0.100 Kg
-
Product weight:
0.095 Kg
Item no.: RP-BG-2169-1-32
Induction Coil for Induction Heater - 32 mm - angled 90° - for BGS 2169
- for heating of screws, nuts, shafts, etc. - suitable for induction heater BGS 2169 - straight type - wire diameter: 4 mm - coil hight: approx. 23 mm - overall length: approx. 220 mm - Inner diameter: 32 mm
-
Shipping weight:
0.100 Kg
-
Product weight:
0.095 Kg
Item no.: RP-BG-2169-1-38
Induction Coil for Induction Heater - 38 mm - angled 90° - for BGS 2169
- for heating of screws, nuts, shafts, etc. - suitable for induction heater BGS 2169 - straight type - wire diameter: 4 mm - coil hight: approx. 23 mm - overall length: approx. 220 mm - Inner diameter: 38 mm
-
Shipping weight:
0.100 Kg
-
Product weight:
0.095 Kg
Item no.: RP-BG-8611
Trim Strip Wedge / Scraper Set - 27 pcs.
- for removal of trim, paneling, etc. - allows a damage-free disassembly, even on painted surfaces - wide range of application through different scraper and removal tool profiles, such as: - scraper with trim guide - slotted lever, angled and straight - disassembly lever, angled and straight, in different widths
-
Shipping weight:
1.170 Kg
-
Product weight:
1.112 Kg
Deutsch
Englisch
Französisch
