Product detailsSpindle oil especially for spindle hoists (Sirio, RAV,...)
The viscosity and addition of additives gives the spindles extra protection and longer life.
The oil is used on spindle lifts with brass or red brass hub nuts. Our spindle oil is a special oil for lifting platforms. It sticks to the spindle despite high speeds and thus ensures a long service life of the lifting nuts.
Product detailsSynthetic, universal adhesive for RP-TOOLS machines (lifts, tire changers, etc.)
This adhesive has been specially developed for RP-TOOLS machines (lifts, tire changers, etc.) to simplify machine maintenance and extend service life. Lubricate all moving parts that are exposed to high pressure loads.
The adhesive spray consists of synthetic components, is extremely strong, especially creep resistant and resistant to water, salt water, weak acids and alkalis. Lubricates and protects against corrosion even under high pressure load and temperatures from -30°C to +200°C. Contains: isobutane, n-butane, propane.Features
- Exceptionally high adhesion and thus good long-term effect
- With corrosion and wear protection additives
- Good high pressure properties
- Low friction and wear values
- Very good creeping and penetrating power
- Protects against oxidation and corrosion
- Also suitable for gears and chains (also O-ring chains)
- Prevents seizing, burning, rusting and hardening
- Water resistant
Lubrication of chains in the normal and high temperature range up to +200°C or as lubrication and corrosion protection for ropes, spindles, cylinders and other drive units. In the automotive sector, for clutch and brake linkages, joints, door hinges and hinges, struts, locks, heaters and flaps, pedals, sunroof and seat guides, bowden cables, telescopic antennas, etc. In general, the adhesive spray meets all requirements for long-term lubrication up to a working temperature of 200°C.Application
The substrate should be dry, dust-free. Old lubricant residues should be removed. Shake can vigorously (for at least two minutes) and spray on at a distance of about 20-30 cm.CapacityCapacity (ml)500ColorColorClear to yellowishDensityDensity0,865 kg/cm³Explosion limit aboveExplosion limit above (Vol.%)10.8Explosion limit belowExplosion limit below (Vol.%)1.4Flash pointFlash point (°C)Approx. -80Hazardous substance containsHazardous substance containsIsobutan, n-Butan, PropanHazardous substance H-phrasesHazardous substance H-phrasesH222 - Extremely flammable aerosol.
H229 - Pressurized container: may burst if heated.Hazardous substance nameHazardous substance nameLackspray AcrylHazardous substance P-phrasesHazardous substance P-phrasesP102 - Keep out of reach of children.
P210 - Keep away from heat/sparks/open flames/hot surfaces. ? No smoking.
P211 - Do not spray on an open flame or other ignition source.
P251 - Pressurized container: Do not pierce or burn, even after use.
P410 + P412 - Protect from sunlight. Do no expose to temperatures exceeding 50 oC/122oF.
P501 - Dispose of contents/container according to the local / regional / national / international regulations.Hazardous substance supplierHazardous substance suppliereurOsol d.o.o.Hazardous substance symbolHazardous substance symbolGHS02
GHS07SmellSmellCharacteristicTemperatureStorage temperature (°C)-5 - +30Water solubilityWater solubilitySlightly miscibleWeight (kg)Product weight0.500
The special viscosity of the long-term axle grease, with regular use, ensures a long service life and a problem-free operation over many years. The high-temperature long-term axle grease is a high-performance grease with exceptionally strong adhesion and offers high wear protection under extreme loads. Furthermore, it is extremely pressure-absorbent, has excellent lubricating properties and is very temperature-resistant: from -35°C to +160°C.
Long Plex B 2 high temperature long-term axial grease is a blue dyed walk, water, corrosion and oxidation resistant EP complex soap grease. It has very good wear protection and high pressure absorption capacity. The grease is used for the lubrication of mechanical high-load rolling and plain bearings, such as wheel hubs and clutch release bearings. It can be used from truck, tractor to excavator and from quarries to the industrial workshop.
MAN standard 284 LI H 2, high temperature grease (e.g. TGA type), CAT (caterpillar) construction equipment, and Komatsu construction equipment. The temperature range of Long Plex B 2 is -30°C to +160°C.
1 piece bolt anchor HST3 M12x115 40/20 with nut and shim. With the concrete anchor bolts or heavy duty dowels it is possible to anchor the load safely in the concrete floor.Anchor rodAnchor rodStrength 8.8DimensionsAnchor length (mm)115Anchor rods diameter (mm)M12Bore diameter (mm)12Edge distance (mm)55Effective embedment (mm)70Mounting height (mm)2 - 20Standard embedment depth (mm)70Thread length (mm)45Drill hole depthDrill hole depth (mm)95GroundGroundCracked-uncracked concreteMaterial coatingMaterial coatingGalvanized carbon steel up to min. 5µmMaterial compositionMaterial compositionSteel galvanizedPiecesPieces1TorqueTorque (Nm)60Weight (kg)Product weight0