Deutsch
Englisch
Französisch
-
-
Product detailsRP-TOOLS´s new B2-series electro-hydraulic 2-post lifts from RP-TOOLS set new standards in lifting technology.
The triple-telescopic, symmetrical support arms and optional 3200 kg, 4000 kg, 5000 kg and 6000 kg capacity lift vehicles from small cars to vans.
The electro-hydraulic design with fully automatic release of the safety pawls ensures energy-saving operation, low noise and cost-effective operation. Our powerful hydraulic power packs are available either in 230V or 400V and are mounted in the lower part of the lifting column for optimum operation.
In addition, the barrier-free models RP-6213B2 (3.2 t) and RP-6214B2 (4.0 t) are equipped with height-adjustable columns and an end-stop switch.
We have a large selection of models and different configurations to meet your workshop needs.
Features- Internal guided lift truck with durable sliding guide jaws
- Entire operation such as "lifting" and "lowering" via control box
- Maximum flexibility thanks to four triple telescopic support arms in symmetrical design, developed for cars up to the latest transporter generations
- Maximum standard lifting height of 2050 mm, with height-adjustable support plates
- The support plate height is quickly height adjustable by means of new, pluggable double telescopic spindle turntable
- Low take-up height of only 98 mm, also ideal for sporty vehicles
- Front arms can swing back
- Automatic arm locking with additional, manual unlocking
- Automatic synchronization control using load-free synchronization cables
- High stability due to specially designed lifting columns and column feet with small dimensions, only five fixing points per column
- Emergency drain device for lowering in case of power failure
- Hand pump for fine adjustment of the lifting carriage (gearboxes, exhaust,... etc.)
- Extension extensions for different vehicle models (optional)
- Includes free accessories
- TÃœV-Austria tested
SpecificationsArm locking systemArm locking systemAutomaticAutomatic release functionAutomatic release functionYesColorColorBlueColumn connectionColumn connectionBase frameConstructionConstructionHydraulicControlControlElektronicDimensionsColumn distance (mm)2800Lifting height max. (also available with additional height for carrying plate) (mm)2050Minimum pad height (mm)98 - 150Packaging dimensions on euro pallet (L x W x H, mm)2900 x 800 x 820Passage width (mm)2580Receiving plate diameter (mm)116Required ceiling height min. (mm)2900Stroke range (mm)1900Support arm extension long (mm)1310Support arm extension short (mm)740Total height with cover caps (mm)2960Total width (mm)3420DriveDriveElectric Motor
Electro-hydraulicEffective anchoring depthEffective anchoring depth (mm)165ElectricsControl voltage (VDC)24Electricity supply:Electrical connection3P+PEFrequency (Hz)50Fuse (electric) (A)16Voltage (V)380/400Motor capacity (kW)1 x 2,6FoundationConcrete qualityC25/30Concrete strength min. (mm)200Hydraulic delivery rateHydraulic delivery rate (cm³/g)4,8InstallationAnchor typeChemical dowelsFixing materialHILTI HIT-HY 150MAXLifting time approx.Lifting time approx. (s)45Load capacityLoad capacity (t)3,2Load capacity max.Load capacity max. (kg)3,2Lock releaseLock releaseOn button press electronicLowering time ca.Lowering time ca. (with a load of 2 t) (s)45NoiseSound pressure level dB(A)75Oil requirementOil requirement (liter)10PressureHydraulic pressure max. (MPa/bar)16,5/165Working pressure (bar/psi)140 - 150 / 2030.53 - 2175.57Synchronous operationSynchronous operationTraction cablesTightening torque max.Tightening torque max. (Nm)80Type/version/designType/version/designTwo Post LiftWeight (kg)Product weight602
You may also be interested in
-
-
-
Product detailsProfessional RP-TOOLS tire changer for efficient, professional work and careful handling of tires and wheel rims on cars, vans, trucks and motorcycles.
The PN series shines in the new improved design and supports you even more effectively in the individual work steps. The optionally available mounting aids such as auxiliary arms, tire levers, adapters, mounting chains,... etc. allow you to even easier and faster installation. The accessory can be universally attached to almost every machine in this series.
Our machines have been extensively tested in a test phase and the quality and performance improved. Ideal for tire service and small workshops.
We have a large selection of models and different configurations to meet all workshop requirements.
Features- Semi-automatic tire changer in first-class professional quality
- Extra wide assembly column in sturdy design and excellent quality
- Simply assemble car, motorcycle, van, truck, off-road and ATV tires
- Protective jaws for aluminum rims are included*
- Plastic glides to protect the rims
- Mounting column with automatic rim release of the assembly tool in vertical and horizontal direction
- The standard electrical supply and return of the clamping system is a guarantee for safe tire assembly and disassembly
- Heavy pressure cylinders on the side
- Self-centering 4-fold clamping jaw system
- New model with wide mounting column
- Simple operation, robust technology
- Tire clamping range up to max. 24 inches
- Rim diameter up to max. 39 inches
- Including tire inflator with pressure relief valve (meets legal requirements)
- Includes free accessories
- TÃœV Austria tested
* Tire changers marked with (A) after the model number are also equipped with the AIR-SHOCK air filling system.
You will find a detailed list of the functions contained below with the technical data of the respective model.
SpecificationsColorColorBlueControlControlElektronic, pneumaticDimensionsWheel diameter max. (mm/inch)1000/39Wheel width max. (mm/inch)330 / 13DriveDriveElectro-mechanicalElectricsElectricity supply:Electrical connection1P+N+PE
3P+PEFrequency (Hz)50
60Fuse (electric) (A)16Voltage (V)110V, 220V, 230V/50Hz
220/380V/50Hz, 230/400V/50Hz
380/400Motor power (kW) installation speed (steps) 1Ph 110V one speed1,10 (1)Motor power (kW) installation speed (steps) 1Ph 230V one speed0,75 (1)Motor power (kW) installation speed (steps) 3Ph 400V one speed0,55 (1)Motor power (kW) installation speed (steps) 3Ph 400V two speeds0,80/1,10 (2)Motor torque 1Ph 110V with one speed max. (Nm)1200Motor torque 1Ph 230V with one speed max. (Nm)1200Motor torque 3Ph 400V with one speed max. (Nm)1200Motor torque 3Ph 400V with two-speed max. (Nm)1200InstallationAnchor typeMechanical dowelsFixing materialAnchor HILTI HST M10X90/10NoiseSound pressure level dB(A)70PressureWorking pressure (bar/psi)8 - 10 / 116 - 145Rotational speedRotational speed (rpm)7Tire changerAdjustable jawsYesAIR-SHOCK system (A) modelsNot upgradableAssistant arm(s)Optional: RP-R-HA80L, RP-R-HA80RBead breaker capacity at 10 bar (kg/kN)3200/31,38Bead breaker range (mm)75 - 305Bead breaker typeFixedBlow pressure, adjustable (bar/psi) lawful. defaults to 3.5 bar3,5/50Inner clamping range (inch)12 - 24Mounting system without mounting leverNot availableOuter clamping range (inch)10 - 22Switch rotational speed tireNot availableWheel lifter (kg)Optional: RP-R-RH50Weight (kg)Product weight200
You may also be interested in
-
-
-
Product detailsProfessional wheel balancer with microprocessor technology from RP-TOOLS for balancing car, truck and motorcycle wheels.
The PN series shines with its new, improved design and now supports you even more effectively in the individual work steps. The optional storage extension provides ample space for consumables, tools and accessories.
The new RP-TOOLS G2 measurement technology now delivers even more precise measurement results in the different balancing programs. Depending on the model you have a wide range of functions and balancing programs, with which you usually get each wheel balanced. The high stability at the same time you save costs when balancing the wheels.
Our machines have been extensively tested in a test phase and the quality and performance has been improved.
We have a large selection of models and different configurations to meet all workshop requirements.
Features- Automatic, static and dynamic unbalance determination in one measuring run
- Diameter, rim width and rim distance can be entered via keyboard
- Automatic and pedal-controlled brakes
- Foot brake - offers the possibility to hold the wheel
- Automatic start/stop when the hood is lowered or open
- Automatic minimization of imbalance value
- Quick-release nut for quick installation of the wheel on the tire balancer
- Storage compartments for balancing weights
- Mounting and storage facility for gauge and centering cone available
- STOP-button to stop the machine immediately
- Display in grams/ounces & mm/inch
- Self-diagnosis & self-calibration
- Static and dynamic balancing modes
- Alloy rims balancing programs
- Rapid optimization (OPT)
- Automatic measurement of distance and wheel diameter*
- Automatic positioning of the wheel for the weights to be attached*
- Special balancing program for more accurate application of the adhesive weights on the inside of the rim*
- Split function (or hidden balancing) to position the weights behind the rims of the rims*
- Automatic adoption of the rim distance, the diameter and the rim width by simply approaching the measuring arm to the rim flange*
* For a detailed list of the functions included please refer to the technical data of the respective model.
SpecificationsBrakeBrakeFoot brakeColorColorBlueControlControlElektronicDimensionsCentering cone size/part number1x P1 - 12001WRim diameter (inch/mm)10 - 32 / 255 - 810Rim width (inch/mm)1,5 - 20 / 39 - 510Wheel diameter max. (mm/inch)1000 / 39.37Displayed unitsDisplayed unitsInch/mmDriveDriveElectricElectricsDisplay (LED, LCD, TFT)Double LED-DisplayElectricity supply:Electrical connection1P+N+PEFrequency (Hz)50Fuse (electric) (A)16Voltage (V)230Motor capacity (kW)1,8InstallationAnchor typeMechanical dowelsFixing materialAnchor HILTI HST M10X90/10NoiseSound pressure level dB(A)70SafetySafety features:Emergency stop buttonYesSuitable for vehicle classSuitable for vehicle classATV
Car
Light commercial vehicles up to 3.5t
motorcycleTemperatureWorking temperature (°C)0 - 50Tire balancing machineBalancing programsALU1
ALU2
ALU3
ALU4
Dynamic
MOT (Motorcycle)
Static 1
Static 2WeightWheel weight max. (kg)75Wheel balancerAccuracy ± (g/OZ)1/0.25Automatic braking after measuring runYesAutomatic rim tensionNoAutomatic transfer of rim dataNoCLIP-ON system for adhesive weightsNoCone:Number of centering cones4Span range (mm)44 - 132Measurement time (s)5 - 7ProgramsAuto stop at the corrective weight location
Hidden spoke mode (SPLIT): no
multi-user: no
OPT Match Program
Self-calibration (calibration also possible by the customer)
Self-diagnosis (diagnosis program for self-diagnosis, without service technician)
Tolerance range Weights adjustable: noShaft (mm)40 x 3Tolerance (°)1,4Weight typesGrams, OuncesWeight (kg)Product weight140
You may also be interested in
-
