Pneumatic manifold 1/2 "1 German type SET11

• The main lines should have a certain inclination in the direction of flow, the diameter of the intermediate line must be smaller than that of the main line.
• The compressed air lines should have a slope of 1.5-2% in the flow direction during operation. This is important to derive condensation!
• At the point where the compressed air is used, a pressure regulator or manometer should ensure the correct operating pressure.
• Depending on the intended use, attach a pressure regulator, water separator, oiler, dryer,... etc. to the compressed air distributors, for example to supply the compressed air devices with sufficient lubrication.
• Check for leaks in each main or sub-pipe connection, as well as each connector such as T-piece, elbows,... etc.

When painting, be sure to use a high quality water separator and a dryer that filters out oil, water and other contaminants! If you have any questions, please contact RP-TOOLS.