Dowels / Anchors

Nut M16 Zn-8 1 pc.

Important note:
Exclusively for use in combination with RP-TOOLS products

Available immediately

Delivery time: 2 - 3 Workdays

SKU:: RP-HI-216468
Shipping weight:: 0,01 kg
Item weight:: 0,01 kg

€ 0,49 *

Stud anchor HST M8 x 75 -/10 1 pc.

Stud Anchor HST M8x75 / 10 1 piece

1 piece stud anchor HST M8x75 / 10 with nut and leaflet. With the concrete anchor bolts or heavy-duty dowels, it is possible to securely anchor the load in the concrete floor.

ATTENTION! ONLY INDICATED Fastening materials should for the attachment of RP TOOLS LIFTS ALLOWED TO USE NOT OF US SHARED dowels, excluded from our warranty

Quantity Needed: Attention! The anchorage depth according to operating instructions must be strictly adhered to. Screed, tiles, etc

Important note:
Exclusively for use in combination with RP-TOOLS products.

Available immediately

Delivery time: 2 - 3 Workdays

SKU:: RP-HI-2105888
Shipping weight:: 0,05 kg
Item weight:: 0,05 kg

€ 1,59 *

Stud Anchor HST M10 x 90 30/10 1 pc.

Stud Anchor HST M10x90 / 10 1 piece

1 piece stud anchor HST M10x90 / 10 with nut and leaflet. With the concrete anchor bolts or heavy-duty dowels, it is possible to securely anchor the load in the concrete floor.

ATTENTION! ONLY INDICATED Fastening materials should for the attachment of RP TOOLS LIFTS ALLOWED TO USE NOT OF US SHARED dowels, excluded from our warranty

Quantity Needed: Attention! The anchorage depth according to operating instructions must be strictly adhered to. Screed, tiles, etc

Important note:
Exclusively for use in combination with RP-TOOLS products.

Available immediately

Delivery time: 2 - 3 Workdays

SKU:: RP-HI-2105712
Shipping weight:: 0,02 kg
Item weight:: 0,02 kg

€ 2,09 *

Wedge anchor FAZ II 10/50 M10 x 135

Low stock level

Delivery time: 2 - 3 Workdays

SKU:: RP-FI-94984
Shipping weight:: 3,62 kg
Item weight:: 3,52 kg

€ 2,39 *

Anchor Rod HIT-V-8.8 M12 x 220 mm 1 pc.

Anchor rod HIT-V-8.8 M12X220MM 1 piece
1 piece anchor rod M12X220MM with mother and supplement for use with injection mortar. With the concrete anchor bolts or heavy duty anchors, it is possible to securely bond the load in the concrete floor with injection mortar.

ATTENTION! ONLY INDICATED Fastening materials should for the attachment of RP TOOLS LIFTS ALLOWED TO USE NOT OF US SHARED dowels, excluded from our warranty

Available immediately

Delivery time: 2 - 3 Workdays

SKU:: RP-HI-387062
Shipping weight:: 0,20 kg
Item weight:: 0,10 kg

€ 2,59 *

Stud Anchor HST M08X115/50 1 pc.

Stud Anchor HST M8X115 / 50 1 piece

1 piece stud anchor HST M8X115 / 5 with mother and supplement. With the concrete anchor bolts or heavy-duty dowels, it is possible to securely anchor the load in the concrete floor.

Must be ordered. Ready for shipment in 3 days after order.

Delivery time: 5 - 6 Workdays

SKU:: RP-HI-371583
Shipping weight:: 0,11 kg
Item weight:: 0,10 kg

€ 2,89 *

Dynamic set M12 1 pc.

Set zum Verfüllen des Ringspalts bei mechanischen und chemischen Dübeln (Kohlenstoffstahl)

Must be ordered. Ready for shipment in 3 days after order.

Delivery time: 5 - 6 Workdays

SKU:: RP-HI-2127789
Shipping weight:: 0,05 kg
Item weight:: 0,05 kg
Permissible order quantity:: 2 pcs.

€ 2,89 *

Anchor rod HIT-V-5.8 M16 x 200 mm 1 pc.

Available immediately

Delivery time: 2 - 3 Workdays

SKU:: RP-HI-387065
Shipping weight:: 0,20 kg
Item weight:: 0,10 kg

€ 2,99 *

Threaded rod AM8 x 1000 8.8 galvanized 1 pc.

Important note:
Exclusively for use in combination with RP-TOOLS products.

Available immediately

Delivery time: 2 - 3 Workdays

SKU:: RP-HI-407496
Shipping weight:: 0,20 kg
Item weight:: 0,19 kg

€ 3,29 *

Stud Anchor HST M12 x 115 40/20 1 pc.

Stud Anchor HST M12X115 / 20 1 STK 1 piece stud anchor HST M12X115 / 20 with nut and leaflet. With the concrete anchor bolts or heavy-duty dowels, it is possible to securely anchor the load in the concrete floor.

ATTENTION! ONLY INDICATED Fastening materials should for the attachment of RP TOOLS LIFTS ALLOWED TO USE NOT OF US SHARED dowels, excluded from our warranty

Quantity Needed: Attention! The anchorage depth according to operating instructions must be strictly adhered to. Screed, tiles, etc

Important note:
Exclusively for use in combination with RP-TOOLS products.

Available immediately

Delivery time: 2 - 3 Workdays

SKU:: RP-HI-2105719

€ 3,59 *

Anchor rod HIT-V-8.8 M16 x 300 1 pc.

1 anchor rod M16X300 with nut and insert for use with injection mortar. With the concrete anchor bolts or heavy duty dowels, it is possible to secure the load safely in the concrete floor with injection mortar

Available immediately

Delivery time: 2 - 3 Workdays

SKU:: RP-HI-2147194
Shipping weight:: 0,20 kg
Item weight:: 0,19 kg

€ 3,69 *

Dynamic Set M16 1 PC (VPE: 2 PCS)

1 piece Dynamic Set M16 for use with anchor rod M16.

About this dynamic sets, it is also possible the annular gaps properly backfilled to a uniform distribution of the lateral forces on all anchor rods allow. (Dynamic sets consist of a large washer with hole for filling the annular gaps; a conical washer to compensate for inclined positions of the anchorage; a nut and a lock nut

(ATTENTION! ONLY INDICATED Fastening materials should for the attachment of RP TOOLS LIFTS ALLOWED TO USE NOT OF US SHARED dowels, excluded from our warranty.

Required quantity:
2SHB RP-6253/54/13/14: 10x anchor M16; 2x adhesive 2SHB RP-6253/54/13/14 with additional holders: 16x anchor M16; 3x adhesive
2SHB RP-6150B: 16x anchor M16; 3x adhesive; 16x dynamic Set

Important note:
Exclusively for use in combination with RP-TOOLS products.

Available immediately

Delivery time: 2 - 3 Workdays

SKU:: RP-HI-2127890
Shipping weight:: 0,03 kg
Item weight:: 0,02 kg
Permissible order quantity:: 2 pcs.

€ 4,19 *

Threaded rod AM10x1000 4.8 galvanized 1 pc.

Anchor rod HIT-V-8.8 M16X380MM 1 piece

1 piece anchor rod M16X380MM with mother and supplement for use with injection mortar.
With the concrete anchor bolts or heavy duty anchors, it is possible to securely bond the load in the concrete floor with injection mortar.

Available immediately

Delivery time: 2 - 3 Workdays

SKU:: RP-HI-339795
Shipping weight:: 0,20 kg
Item weight:: 0,19 kg

€ 4,39 *

Threaded rod AM10x1000 8.8 galvanized 1 pc.

Important note:
Exclusively for use in combination with RP-TOOLS products.

Available immediately

Delivery time: 2 - 3 Workdays

SKU:: RP-HI-407497
Shipping weight:: 0,20 kg
Item weight:: 0,19 kg

€ 5,49 *

Anchor rod HIT-Z M12 x 155 mm 1 pc.

1 piece anchor rod M12X240MM with Nut and supplement for use with injection mortar. With the concrete anchor bolts or heavy duty anchors, it is possible to securely bond the load in the concrete floor with injection mortar.

Available immediately

Delivery time: 2 - 3 Workdays

SKU:: RP-HI-2018413
Shipping weight:: 0,12 kg
Item weight:: 0,10 kg

€ 5,89 *

Stud Anchor HST M12 x 185 110/90 1 pc.

Stud Anchor HST M12X115 / 20 1 piece
1 piece stud anchor HST M12X115 / 20 with nut and leaflet. With the concrete anchor bolts or heavy-duty dowels, it is possible to securely anchor the load in the concrete floor.

ATTENTION! ONLY INDICATED Fastening materials should for the attachment of RP TOOLS LIFTS ALLOWED TO USE NOT OF US SHARED dowels, excluded from our warranty

Must be ordered. Ready for shipment in 3 days after order.

Delivery time: 5 - 6 Workdays

SKU:: RP-HI-2105853

€ 5,89 *

Anchor rod HIT-V-8.8 M16 x 380 mm 1 pc.

Anchor rod HIT-V-8.8 M16X380MM 1 pcs.

1 piece anchor rod M16X380MM with mother and supplement for use with injection mortar. With the concrete anchor bolts or heavy duty anchors, it is possible to securely bond the load in the concrete floor with injection mortar.

ATTENTION! ONLY mentioned fixing materials are designed for attachment RP-TOOLS lifts ALLOWED TO USE NOT OF US SHARED dowels, excluded from our warranty

Available immediately

Delivery time: 2 - 3 Workdays

SKU:: RP-HI-387067
Shipping weight:: 0,20 kg
Item weight:: 0,19 kg
Reviews:

€ 6,09 *

Dynamic Set M10 1 pc. (VPE: 2 pc.)

Dynamic Set M10 1 piece

1 piece Dynamic Set M10 for use with anchor rod M10. About this dynamic sets, it is also possible the annular gaps properly backfilled to a uniform distribution of the lateral forces on all anchor rods allow. (Dynamic sets consist of a large washer with hole for filling the annular gaps; a conical washer to compensate for inclined positions of the anchorage; a nut and a lock nut

Available immediately

Delivery time: 2 - 3 Workdays