Assembling tire assembly machine incl. auxiliary arm + tire balancing machine 001 (ready to use, excl. shipping)

SKU: RP-A-MON-IN-00005
GTIN: 4053072115321
Manufacturers: RP-TOOLS

€ 512,99

incl. 20% VAT , plus (Paketdienst)

Manufacturers recommended retail price: € 666,99

Financing from 10,69 € per month

Available immediately
Delivery time: 2 - 3 Workdays (AT - int. shipments may differ)

MONT

Assembly work for 1 x tire changer and balancing machine + 1 x balancing machine with complete body (ready to use*) for RP-U120P, RP-U221P.

Includes the following services

Before mounting

Transmission of the assembly protocol by the customer
Appointment agreement with the technician

Getting started

Setting and checking the installation site
Unpacking and disposal of the packaging material
Inspection of all components for damage

Assembling the tire changer

Indoor works

Attachment assembly post including hexagonal post with tension spring
Grease assembly post
Attachment push-off arm
Mounting/connecting tire inflator
Attachment of mounting container including holder
Attach claw guard
Possible retightening of V-belt "turntable"
Tightening the nut and screw connections
Greasing the complete unit
Fine adjustment and control compressed air system
Second test run of the machine
Mounting 380V/400V power connector (if you also purchase the 400V connector, it will be mounted)
Assembly quick change system (if you also purchase the quick change system, this will be mounted as well)
Visual inspection of all components for damage (external impact, pneumatic hoses,...)
Hearing inspection of components for leaks compressed air system
Check power supply (plug, condition cable, fuses)
Mounting the tire changer on the floor
Checking, cleaning, filling the compressed air maintenance unit (water separator, pneumatic oil)
Setting the maintenance unit
Function check of the bead breaker
Inspection, cleaning, lubrication clamping device (including lubricating compressed air rotary distributor)
Tighten the screw connections from the clamping device
Checking claws and claw guards
Check and check condition puller arm
Visual inspection of rubber cover with ejector
Inspection, retightening attach bead wiper blade
Inspection and inspection condition assembly post and clamp
Lubricating the mounting post with pressure bearing grease / adhesive
Functional check locking device mounting post/mounting head

Interior works

Visual inspection of all components for damage
Checking and tightening all cable connections
Checking and tightening the screw connections
Checking/adjusting drive belt (replacement if necessary)
Checking, cleaning, lubricating the pedal unit (repair set or replacement if necessary)
Adjusting the pedal unit as required (tilting speed of the mounting post)
Setting pressure for tire inflator
Electrics: check condition reversing switch/speed ?switch

Assembling the balancing machine

Mounting the drive shaft
Attachment of cone holders
Attaching and adjusting the wheel guard
Mounting a complete wheel
Possible retightening of V-belt "drive motor"
Tightening the nut and screw connections
Device calibration for wheel balance
Device calibration for distance measurement*¹
Device calibration for inch measurement of rims*¹
Checking the keyboard
Check the position sensor using the diagnostic program
Second test run of the machine

Final inspection

Fill out the installation report (note defects and open repairs)
Review with the customer (signing the assembly log)
Note further procedure (offer for repair, replacement machine,...)
Apply service label (if there are no defects)
Pictures of successful installation for archive
Packing and loading of machines

Specifications

Weight (kg)

Item weight

0.010

Shipping weight

0.010

Scope of delivery

1 x detergent

1 x small material

1 x working time

1 x adhesive lubricant

Reviews

There are no reviews in the current language.

Term (months)	Monthly rate
12	42,75 €
24	21,38 €
36	14,25 €
48	10,69 €