Connector G3/8 x G3/8

SKU: RP-SP-201C3
GTIN: 4053072008012
Manufacturers: SPIRALFLEX

€ 0,99

incl. 20% VAT , plus (Paketdienst)

Manufacturers recommended retail price: € 1,29

Available immediately
Delivery time: 2 - 3 Workdays (AT - int. shipments may differ)

Features

Easy and fast installation
Arbitrarily changeable and expandable
Professional system
Very good flow properties
Fast solubility
Suitability for vacuum operation
Ideal for compressed air and liquids
Can be mounted without special tools
Applicable with a variety of metal or plastic pipes
Loosen and fasten several times possible

Installation

The main lines should have a certain inclination in the direction of flow, the diameter of the intermediate line must be smaller than that of the main line.
The compressed air lines should have a slope of 1.5-2% in the flow direction during operation. This is important to derive condensation!
At the point where the compressed air is used, a pressure regulator or manometer should ensure the correct operating pressure.
Depending on the intended use, attach a pressure regulator, water separator, oiler, dryer,... etc. to the compressed air distributors, for example to supply the compressed air devices with sufficient lubrication.
Check for leaks in each main or sub-pipe connection, as well as each connector such as T-piece, elbows,... etc.

Painting

When painting, be sure to use a high quality water separator and a dryer that filters out oil, water and other contaminants! If you have any questions, please contact RP-TOOLS.

Specifications

Weight (kg)

Item weight

0.040

Shipping weight

0.050

Reviews

There are no reviews in the current language.