New, electro-hydraulic 2-post lift from RP-TOOLS, with 3-fold telescopic, symmetrical support arms and 4000kg load capacity, equipped with powerful hydraulic power units optionally available in 230 or 400V versions.

• Four 3-way telescopic support arms.
• Maximum standard lifting height of 2050 mm.
• Low pick-up height of only 98 mm.
• Automatic support arm locking.
• Emergency blow-off device.

Our air-to-water heat pumps are the first choice when it comes to saving heating costs in an environmentally friendly way. It requires only a small amount of electricity for operation and the pump to harness this energy. A heat pump operates independently and contributes significantly to the reduction of CO2 emissions and to climate protection.

Professional scissor lift with a load capacity of 3000 kg and floor-level installation, for lifting vehicles from small cars to vans.

• Maximum standard lifting height of 2030 mm
• 3000 kg lifting capacity for heavy vehicles
• Hydraulic lifting system with two cylinders
• Worktops adjustable in length, for lifting long vehicles

The perfect tool for anyone who wants to work extremely effectively with as few electronics as possible and still be equipped with all functions.

The RP-6150B2 lift from RP-TOOLS is a hydraulic 2-post lift with 5.0 tons lifting capacity. The new model is now equipped with fully automatic safety latch release, rope safety, pick-up plate safety, emergency lowering system, tool holder and a choice of 230 V or 400 V motor.

• 5 tons lifting capacity
• Automatic release
• 4 x 3-position extendable arms
• Without obsolete manual release
• Incl. free accessories

Scope of delivery: 1x Mounting machine RP-R-U221PN-400V2S+HA90, 1x Balancing machine RP-R-U120PN.

Delivery contents:
1 x lifting platform RP-R-6253B2V-282-400V
1 x tire changer RP-R-U200PN-400V1S
1 x tire balancer RP-R-U100PN

The RP-8506AY is an electro-hydraulic scissor lift with a load capacity of 3.5 tons and a wing length adjustable from 1547 to 2080 mm.

• For cars, trucks and vans
• Maximum lifting height of 1900 mm
• Hydraulic lifting system with four cylinders for powerful lifting
• Very flat lifting platform with a minimum height of 115 mm

New, electro-hydraulic, 4-post lift from RP-TOOLS with 4.2 tons load capacity, suitable for heavy repairs and for wheel alignment lifting.

• For cars, trucks and vans.
• Maximum lifting height without jack 1850 mm.
• Optional chassis alignment kit and hydraulic axle free jack with a load capacity of 2000kg.
• Optional, adjustable perforated system of the track rails for wheel alignment.
• Long and wide rails without center bars for vehicles with a long wheelbase.

Axle and joint play tester for passenger cars and light commercial vehicles. Hydraulically operated play tester for testing the vehicle suspension and steering elements up to 2.6 t axle load. With eight test movements, this play tester is suitable for chassis diagnostics and periodic vehicle inspections. The low overall height allows installation in a work pit or on a lifting platform.

The RP-U296P tire changer from RP-TOOLS is a first-class professional hydraulic bus and truck tire changer.

• New model
• Clamping range 14-56 inches
• Maximum rim diameter up to 90.5 inches
• Maximum rim width up to 42 inches
• Incl. free accessories

You can never be sure which tires how long you can use these, but you can contribute to a longer life by proper care and storage.

The machine guarantees a perfect tire cleaning. Effectively removes dirt and is environmentally friendly.

• Tyres should preferably be stored on a tire rack./li>
• Eco-friendly and ensures a perfect cleaning of the tyre.
• Strong with the dirt, attentive and careful with the environment.
• The wheel washer Reddy offers great performance in a reduced space. Less space, more room for a quality service.

Omnibus 800 Estate for petrol and diesel with Austria approval. Germany's currently one of the most recently sold exhaust units.