Mobile Hebebühne mechanischer mobiler Heber **ERSETZT DURCH RP-JH-AUTOLIFT3000-R**

Mobile Hebebühne mechanischer mobiler Heber ERSETZT DURCH RP-JH-AUTOLIFT3000-R

SKU: RP-JH-AUTOLIFT3000
GTIN: 4053072120257
Manufacturers: JH6

€ 1.259,99

incl. 20% VAT , plus (Speditionsversand)

Manufacturers recommended retail price: € 1.637,99

Financing from 17,50 € per month

Must be ordered. Ready for shipment in 30 days after order.
Delivery time: 32 - 33 Workdays (AT - int. shipments may differ)

Mobile lift, mechanical mobile lift

The vehicle is raised at its center of gravity at the sills. The lifter mechanism is purely mechanical and powered by an electric drill.

Two gears inside the frame ensure quick lifting or lowering of the vehicle via threaded rods with trapezoidal thread. This lift can be used on 99 % of all cars, pickups, off-road vehicles, vans, minibuses. The lift is suitable for a variety of mechanical jobs such as: in workshops, car washes (contains no hydraulics and no electrical installation), on bodies, in paint work, demonstrations, exhibitions and tire service. Lifting the vehicle in the center of gravity of the vehicle makes it easy to tilt it to the front or rear wheels as needed.

The rails below the sill supports are adjustable to the necessary width of the vehicle. As accessories also documents for cars are provided with special plastic sleepers. An advantage of the lift Autolift 3000 is also based on the increased flexibility and the small footprint. The device has very compact dimensions. Autolift 3000 can be stored anywhere when you do not need it and does not take up much space at such times. The transport of the lifting device is possible by car.

In smaller garages, a 1.5 m lateral clearance is required to insert the lift under the car. Even higher heights in the garage or workshop are not necessary compared to stationary lifts with two or four posts.

Specifications