Main car jack, wheel lift, pit jack for RP-TOOLS 4-post lifts, scissor lifts, and assembly pits. Load capacity: 2500 kg, lifting height: 643 mm, adjustable width: 766-1626 mm. Reinforced version, pump not included! We also offer an optional hand or air pump. Suitable rails must be available.

Hydraulic presses for working in garages and industries available in different versions with manual, pedal, Xantia, and motor operation.
The models with 30, 50, 70, 100 tons have a manual winch for the lifting of the working surface.

• Height-adjustable press table with safety locking pin
• Actuation via hydraulic hand pump
• Mounting points for safe working
• Easy and quick installation

The RP-HA90 pneumatic pressure assisted arm makes it easy to assemble and disassemble low profile, wide and run-flat tires and is essential for a professional tire assembly.

The A-SX1305 body turning device is characterized by its particularly easy maneuverability. By changing just a few components, the turning platform can be conveniently stored in any workshop and used for repairing or maintaining vehicles and small yachts. This space miracle impresses as an optimal aid for the restoration and repair of vehicles.

The new mobile tire balancing machine with max. rim diameter up to 26" and FREE accessories.

• Mobile version
• Manual operation
• Static balancing mode
• Dynamic balancing mode

High lift truck pallet truck stacker 300 cm 1500 kg

• Ready for immediate use
• Additional foot pedal for raising the forks

Stationary nitrogen generator for tires on motorcycles, cars, trucks, buses and commercial vehicles

This nitrogen generator is the optimal solution for generating N2 yourself with an inflation capacity of 3,000 l/hour. at 8 bar.

Seitlicher mechanischer mobiler Heber mit verschiedenen Adaptern

Professional wheel balancing machine from RP-TOOLS with G2 measuring technology and rim diameters up to 32 inches - suitable for balancing car, truck and motorcycle tires

• Automatic, static and dynamic unbalance determination in one measurement run
• Automatic start/stop when the hood is lowered or opened
• Quick clamping nut for quick assembly of the wheel on the balancing machine
• Display optionally in grams/ounces & mm/inch
• Self-diagnosis & Self-calibration
• Static, dynamic and aluminum wheel balancing programs
• Rapid Optimization (OPT)

Professional sandblasting cabin type 420L - the perfect device for blasting medium and large parts

• Air requirement: 350~750 l/min
• Permissible Maximum pressure: 8 bar
• Working pressure: approx. 6 bar

With purely mechanical lifting mechanism, driven by an electric drill.

Application for 99% of all cars, pickups, off-roads, vans, minibuses. Suitable for all mechanical work, body shops, paintwork, demonstrations, exhibitions, car washes, tire services.

Pallet stacker RP-CH-1516 incl. The waste press kit from RP-TOOLS reduces waste quantities by min. 50%. Thanks to the easy installation, the refuse press attachment with the high-lift truck is quickly in use. With the construction, the container is pressed against the attachment from below and waste quantities are reduced.

• Immediately ready for operation
• Additional foot pedal for lifting the forks

Car exhaust extraction unit for wall mounting

Professional tire changer from RP-TOOLS for efficient work and gentle handling of tires and rims for cars, vans, trucks and motorcycles.

• Semi-automatic tire changer in professional quality
• Self-centering 4-fold clamping jaw system
• Large selection of models with different configurations
• New model with wide mounting column
• Tire-clamping range up to 24 inches
• Maximum rim diameter up to 39 inches
• Includes tire inflator with pressure relief valve
• Including free accessories

Mobile IR paint dryer RP-S3000 in European industrial quality for use in the "spot/repair" area.

• Beam power: 3 x 1000W
• Drying area: 800 x 1000 mm
• Easy operation thanks to new electronic control
• First-class industrial quality

• Powerful, robust compressor
• Condensate is drained using a ball valve
• Oil level check through sight glass
• Two cylinders

The RP-MHB700 is an electro-hydraulic, particularly robust and safe scissor lift for motorcycles and scooters with 700 kg load capacity and a max. lifting height of 1200 mm. Ideal for motorcycles and scooters with a maximum weight of 700 kg. On request, it is equipped with extensions that make it possible to lift 3-wheel and small cars safely.

This all-round oil-fired heating system can be used with many types of oil. Vegetable, animal and mineral oils, for example rapeseed oil, soybean oil, engine oil, universal oil and deep frying oil.

For lifting vehicles on the mature and stable points in the sill area.

Lift loads such as heavy workpieces, packages or objects on tables, bumper or in vehicles.

Professional wheel balancer from RP-TOOLS with G2 microprocessor technology and rim diameter up to 32". Suitable for balancing car, truck and motorcycle wheels.

• Automatic static and dynamic imbalance evaluation in a single measuring run.
• Automatic start / stop, when lowering / raising the safety hood.
• Quick release nut for a rapid mounting of the wheel on the balancing machine.
• Display in grams/ounces & inches/millimeters.
• Self-diagnosis & self-calibration.
• Static, dynamic & alloy rims balancing programs.
• Rapid optimization (OPT).
• Including free accessories.

The RP-U221PN tire changer from RP-TOOLS is a fully automated, first-class, high quality tire changer.

• New model with extra wide hexagonal column
• Tire clamping range up to max. 24 inches
• Maximum rim diameter up to 39 inches
• Incl. free accessories

The RP-U200MPN tire changer from RP-TOOLS is a semi-automatic motorcycle tire changer in a first-class professional quality.

• Especially for motorcycle tires
• Incl. puller for motorcycle tires
• Incl. motorcycle adapter
• Incl. motorcycle mounting head
• Tire tensioning range up to max. 24 inches
• Maximum rim diameter up to 39 inches
• Incl. free accessories