Omnibus 800 station wagon for gasoline and diesel with Austria approval incl. OBD readout. Germany-wide currently one of the most sold new exhaust equipment. Listed in Nissan and Renault workshop catalog. Multifunctional AU station with sophisticated equipment. Operation via PC. 27 inch TFT monitor, SW laser printer, keyboard, opt. mouse, ...
Thanks to the latest measuring bench technology, the warm-up phase takes only five minutes and the legally required calibration only has to be carried out once a year.
AGS-200 gasoline measuring module
12 volt infrared four gasoline tester with one year calibration interval and radio receiver for RPM and temperature, NOx measurement prepared.
Measuring range:
- CO from 0 to 9.99 % Rec. 0.01
- CO2 from 0 to 19.9 % resolution 0.1
- HC Hexane from 0 to 13999 ppm Rec. 1
- O2 from 0 to 24.99 % Rec. 0.01
- NOx from 0 to 4999 ppm Rec. 10
- Lambda from 0.5 to 2 Rec. 0.001
- RPM from 300 to 9990 rpm Rec. 10
- Oil temp. from 20 to 150 °C Rec. 1
OPA-100 Diesel measuring module
12 volt turbidimeter with, 20 cm long measuring chamber and radio receiver, RPM and temperature.
Measuring range:
- Turbidity % from 0 to 99.9 Rec. 0.1
- Turbidity m-1 from 0 to 9,99 Res.0.1
- Speed 1/min from 300 to 9990 Rec.10
- Temp. oil °C from 20 to 150 Rec.1
- Temp. exhaust gas °C from 20 to 400 Rec.1
MGT-300 EVO Speed detection device
Speed detection device with ripple and vibration. Integrated temperature measurement. Radio transmitter for data transmission to AGS-200 and OPA-100.
Software
AU Software OTTO: Otto/Diesel license, EOBD, ASA for OBFCM LF5, including ASA interface.
Connex Smart Scantool
Incl. OBD readout. Connection OBD SAE j1962, USB v2.0 Mini-b, Wireless connection Bluetooth v2.0, Internal memory card 2 GB MicroSD.
Device trolley, round
Device trolley, round, with printer compartment, 8-socket strip incl. on/off switch and holder for AU module.