The RP-6150B2 lift from RP-TOOLS is a hydraulic 2-post lift with a lifting capacity of five tons. The new model is equipped with fully automatic unlocking of the safety pawls, rope safety device, pick-up plate safety device, emergency lowering system, tool holder and standard 380V engine.
There is a ramp on the ground, comfortable working on vehicles with a high roof is ensured here (hydraulic lines and balancing ropes run under the ramp).
Hydraulic lifting system with two lifting cylinders, with less moving parts and significantly lower maintenance than spindle lifts. The four triple-telescopic brackets are designed for the new transporter generations, with front arms folding backwards.
- For cars, trucks and vans
- 5000 kg lifting capacity for heavy vehicles
- Internal guided lift truck with durable sliding guide jaws
- Entire operation such as "lifting" and "lowering" via control box
- Maximum flexibility thanks to four triple telescopic support arms in symmetrical design, developed for cars up to the latest transporter generations
- Maximum standard lifting height of 2050 mm, with height-adjustable support plates
- The support plate height is quickly height adjustable by means of new, pluggable double telescopic spindle turntable
- Low underwing height of only 120 mm
- Automatic synchronization control using load-free synchronization cables
- High stability due to specially designed lifting columns and column foot plates with small dimensions
- Emergency drain device for lowering in case of power failure
- Hand pump for fine adjustment of the lifting carriage (gearboxes, exhaust,... etc.)
- Extension extensions for different vehicle models (optional)
- Includes free accessories
- TÃœV-Austria tested
- Rope grease
- Mounting kit
- 10 liters hydraulic oil
- Power plug
Regarding installation you can choose between a self-installation (RP-TOOLS certified specialist) or an installation through our trained team of technicians, including technical briefing. Upon request, we also carry out customer training at our headquarter or on-site at the customers location.
To operate the machine right away, we recommend to order the suitable installation material at the same time. Installation packages and accessories can be easily ordered in our online shop.
- No maintenance required.
- No corrosion of the cylinder and ram (constant contact of the cylinder with oil).
- No air contact of any part (as with conventional single-headed pistons).
- Proven technology (has long been used in forklifts).
Easy installation via multilingual assembly instructions, with inspection log book for UVV approval, for commercial use.
The fully integrated hand pump allows for fine adjustment of the lifting height, for engine and gearbox installation, exhaust, etc..
Our machines are powder- coated instead of painted. Thick coatings guarantee a high resistance to mechanical stress and a good insulation value against electrical voltage. Weathering and acid-resistant, environmentally friendly.
Optional height adapters for different vehicles. The adapter is plugged into the peg and then turned into secured position.
Large spare parts warehouse with more than 20,000 certified parts in original RP-TOOLS quality.
A universal tool holder for use with impact wrenches and accessories is delivered as standard with each lift.
24V control box for simple lift operation. "Raise" and "Lower" control via safety pushbuttons. If required, the lift can be secured against unauthorized use.
A mechanical safety latch integrated on both sides ensures safety at the workplace. Automatic release of the safety lock when lowering.
Internal carriage in square welded design, with durable load bearings made from nylon, lifted through hydraulic cylinder and chain-over roller. Lifetime of the load bearings up to 10 years in normal operation.
Specially attached rubber car door protectiion pads prevent the touching of the door or door edge when entering and exiting the vehicle.
Quickly adjustable lift pad height through the use of new plug-in screw pads. Low intake height of only 98 mm, ideally suited for sport vehicles.
Our lift can be instantly lowered from any position without having to push the "Raise" button before.
Use of high quality electric motors with copper windings for an increased service life.
Hydraulic, powerful lifting system with two robust and maintenance-free high-pressure cylinders, fewer moving parts and a significantly lower maintenance than a mechanical spindle lift. We use only high quality seals from renowned manufacturers.
Emergency lowering unit for lowering in case of power failure.
Maximum flexibility through four 3-stage telescoping support arms in a symmetrical design, developed for cars up to the newest transporter generation.
TÜV certified - in accordance with international safety standards, with type examination by TUV Austria for increased safety.
Ideal as a work platform or to double your parking space for long term parking or wintering of your vehicle on the raised lift. Your car safely stays in position by mechanic support without weighing on the hydraulic system.
Our lifts allow for a maximum drive-thru width of 2580 mm, with minimum external dimensions. This advantage makes a wide opening of the vehicle door possible.
For even better comfort, all arms can be moved to both the front and rear. This allows you to lift different types of vehicles without any difficulties.
Maximum standard lifting height of 2050 mm, with height-adjustable lift pads.
Due to the very flat crossover plate, our lift has a very low crossing height on the ground. In addition, the transfer plate protects the hydraulic hoses and synchronous ropes.
The brackets have an external dimension of 120 x 120 mm. These XXL brackets lift your vehicles safely.
Our support columns have an external dimension of 310 x 260 mm and are built specifically for heavy duty use. Thanks to the special shaping, the columns remain stable even at high loads.
Tested with 50,000 lifting cycles at full load, conforms to CE EN 1493. components production by Italian manufacturers guarantee high product quality and long service life.
Specially designed posts with 6 mm thick quality steel and base plates provide a high level of stability, with five anchoring points per column. Low tolerances ensure a 100% fit accuracy.